HOW TO REPAIR A MOBILE PHONES IC
Now we are going to look some Hardware Problems. I will introduce
to you the hardware of the phones; the board contains front side and
the back side. The back side contains many chips and this is very
important because it form like a circuit without the other play a role
or spoil then the whole phone will not function. Then the front is where
there LCD connector play a role keypad connector and many more. It is
very important for the repairer to know what equipment is suitable to
remove the chip.There are many chips:
1) Power IC = Supply the current to the whole part of the phone.
The supply of the current can only work if there is battery
Inserted into the phone. Normal phone for e.g. Nokia 1200,
the battery contain 3.7 voltage.
2) Hagar IC = This is for the network, if there is no network available inside
The phone then the problem could be the Antenna or this IC
Chip. This chip is use for transmit or receive calls or messages
3) Charging IC = This the last step to check if there is problems of unable to
Charge the battery. For e.g. if you change the charging
Connector and it still does not work then it might be the
Charging IC.
4) Flash
IC = This is for the permanent storage of systems of the phone for e.g.
in the phone it has the message, phonebook, the extras, the android and
many more we cannot delete this system.
5) RAM
IC = with this we can erase the data in the phone. For e.g. the names
in the phonebook can be erasable same goes to messages in the message
column we can erase it.
6) User Interface IC = Light, keypad, ringtone and vibrator all are in this IC.
If there are problems with these then after all changes
And repairing still it do not work then the final step will
Be changing the IC
7) Audio IC = This is used for the ringtone problems, if there is no ringtone in
Then you must change the Audio IC.
Comments
Post a Comment